Fujitsu M2541B : Switch and Jumper Settings

Setting Master/Slave

Pin           State       Function                                                                        
                                                                                                          

7-8           SHORT*      MASTER                                                                          
              OPEN        SLAVE                                                                           
                                                                                                          

Setting cable select mode

Pin           State       Function                                                                        
                                                                                                          

6-7           SHORT       Connected                                                                       
              OPEN*       Not connected                                                                   
                                                                                                          

Pins 1-5 are not used and by default are not shorted.