Fujitsu DL6400/6600

Software compatibility. This printer, which primarily operates with the DPL24C PLUS command set, is compatible with the IBM Proprinter XL24E command set and the Epson ESC / P2 command set.

Various character sets. IBM PS/2 character sets (code page 437, 850, 852, 855, 860, 863, 865, 866, and DHN), ISO 88594 /ECMA 94, and so on (a total of 37 or 39 national character sets depending on the emulation) are available. IBM PC character sets 1 and 2 are available for the Fujitsu DPL24C PLUS command set and the IBM Pro-printer XL24E emulation. Italic character set and graphics character sets 1 and 2 are available for the Epson ESC/P2 emulation.

Multiple fonts. The printer has eighteen resident fonts: Nine bitmap fonts - Courier 10, Pica 10, Prestige Elite 12, Boldface PS, OCR-B, Correspondence, Compressed, Draft, and High-speed Draft and nine outline fonts - Timeless, Nimbus Sans, and Courier, each in upright, italic, and bold.

High-speed printing. At 10 cpi, print speed ranges from 140 cps (DL6400) for letter quality to 540 cps (DL6600) for high-speed draft quality.

Large print buffer. 128K bytes are available in total for storing input data and downloading fonts. A large input data buffer allows you to send files to the printer and return quickly to your application.

Simple switching of paper types. &quotParking" continuous forms makes it easy to switch between continuous forms and single sheets. With the optional 2nd tractor, two different continuous forms may be loaded & selected from the front panel or the host computer in addition to the cut sheet paper

Auto tearoff. Continuous forms are fed automatically up to the tear-off position at the end of each job.

Maintenance-free. Periodic cleaning and changing the ribbon cartridge are all that's required.

Installation

The DL6400/6600 has no dip switches or jumper settings. Fujitsu provides DLMENU, a PC based program which can be used to change printer configuration. On non PC systems or when DLMENU is not available the printer has a built in menu system to allow change to its internal settings.

DL6400

With printer in off-line mode, pressing FONT & MENU will cause the printer to enter its off-line set up mode, the printer will print out further instructions on the operation of this mode.

DL6600

This printer has a LCD front panel on which any setup information is displayed rather than printed. Press the NEXT DISPLAY button n times until the display shows ENTER SETUP above the F1 button, Press F1 to enter the set up mode. Further discussion of the set up mode is beyond the scope of this document.

Specifications

                                                                             DL6400      DL6600

Printing technology                 24-wire dot matrix, impact type

Color printing                      user installable option                                         
Optional

Resolution     Letter quality        360 x 180 dots/inch

  Report quality                      180 x 180 dots/inch

  Draft quality                       120 x 180 dots/inch

  High-Draft           		      90  x 180 dots/inch

  Graphics                            360 x 360 dots/inch

Printing speed

Letter quality     		     Characters / second (12 cpi)             168         216

                                     Characters / second (10 cpi)             140         180        
                                                                                                     
                                                                                                    
 Report quality    		     Characters / second (12 cpi)             336         432

                                    Characters / second (10 cpi)             280         360

Draft      			    Characters / second (12 cpi)             504         648

                                    Characters / second (10 cpi)             420         540

Performance at ECMA-132             Best quality (Pages per hour)            223         254

                                    Lowest quality (Pages per hour)          393         412

                                    Graphic (Pages per hour)                 195         216

Line feed speed                     ms (at 6 lpi)                            50          50

Form feed speed                     inch/second                              9           9

Command set                         DPL24C+

Emulation                           IBM Proprinter XL24E, Epson ESC/P2                              
Standard

Resident Fonts Bitmap               Courier10, Pica10, Prestige Elite12,                            
                                    Boldface PS                                                      
                                    Compress17, Correspondence10, OCR-B,                            
                                    Draft

                                    Courier, TimelessPS, Nimbus San                                 
Scalable                            (U/I/B)

Character sets                      437, 850, 851, 852, 855, 860, 863 865,                           
                                    866, ISO8859-1/ECMA 94 USA, UK, German,                          
  Code pages                        French, Italian, Spanish, Finnish,                               
                                    Norwegian, Danish, Hungary, Slovenia,                            
                                    Mazowia, Polish, Latin7, Latin2, Latin P,                        
                                    ISO-Latin, Kamenicky, Turkish, ELOT928,                          
                                    Cyrillic

Print line                          Columns at 10cpi                         136         136

                                    Columns at 12 cpi                        163         163

Paper thickness (max)               mm                                       0.4         0.4

Paper width (max)                   102 mm to xxx mm                         420         420

Paper handling  Standard            Manual paper feeder

                                    Bi-directional push feed tractor

     Optional                         Automatic top cut sheet feeder

                                    second bin for top cut sheet feeder

                                    Automatic front cut sheet feeder (only 1                        
                                    bin)

                                    Bi-directional 2nd  rear tractor (push),                        
                                    Stacker

Paper park function

Automatic loading  for manual feed

LCD Display

Host control Paper Path (HCPP)

Autom. Paper Thickness Control

					APTC                                                            
                                                                                                    
Number of copies                       including the orginal                  8             8

Data buffer size                    Setup selectable                         128         128

Centronics Interface                Standard

RS 232C serial Interface            Standard

Noise level                         dB (A) at ECMA-74                        55          56

Head life                           xxx million strokes each wire            400         400

Ribbon life                         over xx million characters (DQ)          18          18

Power Requirements:

100 to 120 VAC +-lO% (100 V models)

330 watts (Average) 790 watts (Max)

220 to 240 VAC +-10%, (200 V models)

360 watts (Average) 860 watts (Max)

50 or 60 Hz +2%, -4%

Operating Conditions:

5 to 380C (41 to 1000F)

30 -- 80% RH

Dimemsions: 600 mm (23.6 in) 300mm (11.8 in) 325mm (12.8 in)

Weight: 25 Kg (55lb)

Reliability (MTBF) 8000 hours

Part Numbers & Options

Ribbon Black (life = 18 mil)                   CA02460-D115

Ribbon Black - refill                          CA02460-D215

Print Head (DL6400)                            D86B-1138-C363

Print Head (DL6600)                            D86B-1138-C353

2nd Push Tractor                               CA02464-E602

Stacker Unit                                   CA02464-0081

Front Cut Sheet Feeder(DL6400/6600)            CA02464-0051

Top 1st Bin Cut Sheet Feeder (DL6600)          CA02464-0001

Top 2nd Bin Cut Sheet Feeder (DL6600)          CA02464-0031

User Manual (English)                          C147-E015-03EN

Note: On DL6600 only 1 sheet feeder may installed at one time either front or top mounted