

The Fujitsu VM4 / VM8 are ideal for the low to medium volume user, producing sharp and clear printouts at a standard resolution of 300 x 300 dpi, which is optimised by Fujitsu Enhanced Imaging Technology (FEIT) to produce 300 x 900 dpi.
Separately exchangeable toner cartridge and print unit and low energy consumption in standby and sleep mode provide economic and environmentally friendly operation.
Standard PCL5 ( LaserJet III ) emulation for the widest software compatibility, with optional PostScript compatible emulation card available.
Optional RS232, AppleTalk and Ethernet interfaces cater for the wide range of host equipment available today.
INSTALLATION
Preparing the Print Unit & Toner cartridge
The VM4/VM8 has an H.P. LaserJet III emulation, you should select this emulation within any software you will use with the VM4, if LaserJet III is not available in your application/OS software select the following in decreasing order of preference LaserJet II, LaserJet +, LaserJet
If you have installed a Postscript emulation card then by default the printer will select this emulation. In your application select the Apple LaserWriter+ driver. To use the Postscript emulation card, the printer MUST have at least 3meg of ram in total, confirm by printing printers status page to check installed ram size.
If you need to alter any of the internal printers default settings, which are not configurable via your chosen software driver, you will need to use the PC based VMMENU program which is supplied with the printer and is documented in the printers user manual.
SPECIFICATION
VM4 VM8
Technology LED
Resolution Standard DPI 300 x 300
Enhanced DPI 300 x 900
Processor Intel 80960 Intel 80960
(10MHz) (20MHz)
Print Speed PPM Pages / Minute 4 8
Emulation Standard HP LJIII
Option TrueImage
Resident Fonts Bitmap Courier 10
Courier 12
( Above in Normal, Bold &
Italic)
Line Printer 8.5
Scaleable CG Times
Univers
( Above in Normal, Bold &
Italic)
Option H.P. Font Card A (Simm)
Slots 2 (Simm)
Paper Capacity Bin 1 Sheets 100
Output Sheets 50
Paper Weight Auto gsm 64 - 90
Manual gsm 64 - 105
Memory Standard 1 mb
Option 2/5/9 mb
Set Up VMMENU
Interfaces Standard Centronics
RS-232
Option LocalTalk
Ethernet
Weight Kg 7.2
Noise Standby/ dB (A) ? / 0
Sleep
Printing dB (A) 48
Power Standby/ watts 25 / 10
Sleep
Printing watts 400
Dimensions Height mm 130
Width mm 345
Depth mm
Consumable Life Toner pages 1,600
Drum pages 10,000
MTBF hours 4,000
Print Volume pages/month 3,000
Part Numbers & Options
VM4 Print Unit CA02417-C923
(10,000 pages)
VM4 Toner Kit CA20147-C903
( 2 x 1600 pages)
VM4 Fuser Unit CA02417-C943
( 60,000 pages)
VM8 Print Unit CA02417-C983
(10,000 pages)
VM8 Toner Kit CA20147-C973
(2 x 1600 pages)
VM8 Fuser Unit CA02417-C948
( 60,000 pages)
Serial Interface CA02417-C801
Ethernet Interface CA02417-C861
LocalTalk Interface CA02417-C811
requires Postscript emulation card and at least 2MB RAM upgrade
1mb Ram upgrade CA02417-C851
2mb Ram upgrade CA02417-C852
4mb Ram upgrade CA02417-C854
8mb Ram upgrade CA02417-C858
PostScript emulation CA02417-C822
card Requires at least a 2MB RAM upgrade
Paper cassette (A4) CA02417-C710
Paper cassette (Letter) CA02417-C711
User manual (English) C145-E001-01EN
SWITCHES & JUMPERS
There are no jumper or dip switches on this printer, all internal configuration is carried out using the VMMENU program supplied with the printer.