Home Page Hard Disk DrivesMagneto-Optical Drives and LibrariesScannersPrintersHalf Inch Tape DrivesMiscellaneous Products

Configuration

files
glossary
ce declarations
technical

distributors

 

M1612, M1614T Specifications

Family Alias : PB8' T

Fujitsu offers new high capacity ATA-2 interface disk drives for entry level and midrange desktop systems. The new M161X disk drives are low profile, one inch high, 3.5 inch disks. They are available in two storage capacities 545MB and 1091MB. Nearly 400Mbits per square inch of high areal density allows these capacities to be stored on just one and two platters respectively. Both drives are manufactured to Fujitsu's highest reliability standards.

 


Features

Drive :

Low profile
High storage capacity
Fast positioning time (11ms average)
4,500 RPM
300,000 hour MTBF
Constant Density Recording
Embedded servo
Read Ahead / Write Cache
ECC Read-Solomon on the fly 11 bytes
Power Save Mode

ATA features :

ATA-2 command set
64KB multi-segmented buffer
High speed data transfer, up to 16.7MB/second
IBM task file emulation
Automatic retry and branch for defect management
Two drives can be daisy-chained on a single interface cable.


Part Numbers and Options

Model Capacity Part Number Mounting Screws
M1612T 545.68MB CA01340-B321 6-32 UNC (TAU), M3 (TAM)
M1614T 1,091.37MB CA01340-B341 6-32 UNC (TAU), M3 (TAM)

 


Functional Specifications

Model M1612T M1614T
Form Factor 3.5-inch × 1-inch high
Interface ATA-2
Formatted Capacity 545.68MB 1,091.37MB
Storage Capacity/Track 43,520 to 78,336 bytes
Number of Disks 1 2
Number of Heads 2 4
Number of Cylinders 4,133
Sectors Per Track 85 to 153
Recording Density 90,000 bpi 
Track Density 4,394 tpi
Recording Code 8/9 PRML
Command Specification ATA-2
Data Transfer Rate to/from media 4.37 to 7.89 MB/s
PIO mode 4 16.7MB/s max. (PIO Mode 4)
DMA mode 2 16.7MB/s max. (DMA Mode 2 )
Spindle Rotational Speed 4,500 RPM ± 0.5%
Average Latency 6.67 milliseconds
Seek Time track to track 3.0 milliseconds
average 12.0 milliseconds
full stroke 23.0 milliseconds
Input Voltage : +12V ± 5%, +5V ± 5% 100mV P-P
Power Consumption 4.6 W typical.
Dimensions (without bezel) width 101.6mm
height 25.4mm
depth 146.0mm
Data Buffer 64 KB FIFO ring buffer.
Logical Data Block Length 512 bytes
Weight 0.6 kg
Mean Time Between Failures (MTBF) 300,000 power-on hours
Motor Start Time 8 seconds typical
Motor Stop Time 6 seconds or less

 


Physical Specifications

  Operating Idle
Temperature 5 - 55ºC -40 to 60ºC
Temperature Gradient 20ºC per hour or less -
DE Surface Temperature 60ºC or less -
Relative Humidity 8% to 80% RH 5% to 95% RH
Maximum Wet Bulb Temperature 29ºC non-condensing -
Altitude Range -300 to 3,000 metres -300 to 12,000 metres
Vibration 0.5G (5 to 500Hz) or less 4.0G (5 to 500Hz) or less
(power off state after installation)
Shock 5G (11ms max.) or less 75G (11ms max.) or less
(during transportation and storage)
Acoustic noise 32dBA (3 axis, idle)  -

 

 





short_copyright
Last updated : 21 October, 1996