• Do not install the device in a place where excessive vibration may occur.
• Keep the scanner out of direct sunlight and away from any heat sources.
• Do not place any material around the scanner to ensure adequate air circulation.
• Do not install the scanner in a humid or dusty environment.
• Do not connect the scanner to a wall socket that services any other noisy devices, such as electric motors.

Switch Settings

There is only one one switch that needs to be configured before the scanner is connected to the SCSI bus. The SCSI ID selection switch, located at the back of the scanner close to the interface connector, must be changed to a unique number. Normally the host would take ID 7 with peripheral devices taking IDs 0 through 6 although convention requires that the scanner appears at ID 5. Check the SCSI host documentation for further details.